Rubber Backed&Composite Zta Ceramic Wear Resistant Liner for Bins

Basic Info

Model NO.	ZTA
Al2O3	92%
Density	3.6g/cm3
Bending Strength	220 MPa
Compression Strength	1050MPa
Fracture Toughness	3.7 Kic
Hv Hardness	950n/mm2
Rubber	Natural Rubber
Steel	Q235A
Adhesive	Brown Glutinous Liquid
Size	Customized Designs
Bolt	Customized
Ceramic Size	Customized
Transport Package	Bag
Trademark	firstar
Origin	China
HS Code	6909120000
Production Capacity	1500PCS/Month

Product Description

 

1. Detailed description:

In aggressive industrial applications, equipment where high impact , high abrasion inevitably suffer mechanical attack, chemical attack, corrosion, or by a combination of these three modes.
QMX's Ceramics can offer various of ceramic liner plate for customer's abrading environment. Composite ceramic wear liner is intended for the toughest applications with very high materials. when a combination of extreme wear and impact resistance ans long wear life is needed , Ultraming offer composite ceramic wear liner with large and hard ceramic bricks vulcanized into a matrix of wear resistant rubber .due to its elastic properties the rubber acts as a dampener. It makes it possible to use this product in applications with a lot of impact without the risk of crushing the ceramic bricks .

2.Product features:
> High hardness
> Superior abrasion and impact resistance
> Corrosion and chemical resistance
> Light weight
> Easy installation by epoxy resin or bolt
> Improve your working environment-noise, vibration and safety

3. The alumina ceramic tiles for vulcanization including:
- Square tile: 10x10x2~10mm, 17.5x17.5x2~15mm, 20x20x2~15mm, 33x33x7~25mm, etc.
- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.
- Hexagonal tile: S12xT3~20mm, S19xT6-25mm
- Ceramic Block: 40x40x40mm, 32x32x22mm, 38x38x38mm,etc.
- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm , 40x40mm,50x50mm etc.

4. The main benefits of the ceramic rubber composites:
- Excellent wear resitance
- Excellent anti-impact due the elastic property of the rubber
- Easy to be installation and then reduce downtime
- Reduce the sould pollution.

Product Parameters

S.No.	Material	Attributes	Properties
1	Ceramic	Material	92%, 95%, T95%,96%, ZTA
	Tiles
2	Rubber	Component	natural rubber, nitrile-butadiene rubber ,Flame Retardant ,others
		Density	~1.4g/cm3
		Tensile strength at break	≥15Mpa
		Elongation at break	≥250%
		Shore Hardness	45-65
		Adhesive between tile and rubber	1.2-3.0 Mpa
		Adhesive between rubber and equipment	≥3.5 Mpa
		Thermal conductivity. (normal temperature)	2w/m·k
		Aging period	≥15 Years
		Working temperature	-50ºC - 200ºC
3	Steel plate	Material	Q235A
		Density	7.85g/cm3
		Thickness	5-6mm
4	Adhesive	Appearance	Brown glutinous liquid
		Solid content	20±3%
		Viscosity	≥2.5 Mpa
		Peel strength	48h N/2.5cm≥120
		Compressive strength	≥850 Mpa
		Working temperature	-20ºC - 100ºC
Whole Plate (mm)	150x300, 300x300, 450x000, 500x500, 600x450 etc.
Ceramic Size (mm)	Square Tile: 10x10, 20x20, 33x33, 50x50, 100x100, 150x100,etc.
	Hexagonal Tile: 12x3, 12x6, 19x7, 19x12.5, 19x25,etc.
	Locking block with lock and groove: 38x38, 40x40, 30x30,etc.
	Dimple Tile: 20x20 with 5 dimples, 20x30 with 18 dimples, 20x30 with
	13 dimples, 20x20 with 1 semi-spherical surface
Ceramic Thickness (mm)	3-75mm
Alloy Steel Size (mm)	Thickness: 3-10mm
Rubber Thickness (mm)	Depends on the impact stress expected.

Company Profile

Qimingxing offer quality wear and Ant- impact ceramics, in combination with our experienced and competent staff, ensure the increased efficiency and service life of all equipments and materials to which they are applied. - Established Ultrafine Energy Efficiency Technology Research Institute - Increase lifespan of wearable parts - New improved technology and products - Minimal downtime to minimize delays in production - Variety of wear combating options available as a one stop solution - Strong focus on product innovation supported by Chinese Academy of Sciences. - Customized application techniques to suite any wear problem

Packaging & Shipping

CertificationsFAQ

FAQ

Q: What is your experience in your products?
A: We have 22 years experience in this industry line. We are professional manufacturer in this area.
Q: What is your MOQ?
A: The MOQ is different as per different products, for example, 1 Ton for ceramic ball.
Q: Can you accept small quantity sample order before production?
A: Yes, we can offer sample for your testing first
Q: Can you provide free sample?
A: Yes, within 1kg.
Q: What is your production time?
A: We have large stock for standard products. Normally within 7-10days after receipt the deposit.
Q: What are your payment terms?
A: T/T, L/C, Western Union