Zta Zirconia Toughened Alumina Ceramic Plain Brick Wear Tile Liner as Industrial Linings

Zta Zirconia Toughened Alumina Ceramic Plain Brick Wear Tile Liner as Industrial Linings

ZTA Zirconia Toughened Alumina Ceramic Plain Brick Wear Tile Liner as Industrial Linings Technical Data of Zirconia Toug
Basic Info
Model NO. 147x97x50mm
Zro2+Ye2o3 23.5%
Bulk Density 4.15g/cm3
Moh′s Hardness 9
Advantage High Impact Resistance
Water Absorption 0.01
Mode of Ceramic Shaped Dry Pressing
Transport Package Plywood Pallet and Thick Paper Box
Specification 147x97x50mm
Trademark ZAWA
Origin China
Production Capacity 600ton/Month
Product Description
ZTA Zirconia Toughened Alumina Ceramic Plain Brick Wear Tile Liner as Industrial Linings

 

Technical Data of Zirconia Toughened Alumina Bricks ZTA Alumina Ceramic Wear Linings

Category92 Series95 SeriesZTAZrO2
Al2O3≥92%≥95% ≥74%/
ZrO2+Ye2O3//≥23.5%≥95%
Density≥3.60g/cm3≥3.65g/cm3≥4.15g/cm3≥6g/cm3
Mohs hardness 9999
Water absorption%≤0.02≤0.02≤0.010
Bending Strength MPa255275500900
Compression strength MPa≥850≥90014002200
Fracture Toughness MPam 1/23.653.755.57
Wear Volume≤0.55cm3≤0.50cm3≤0.15cm3≤0.1

Brief introduction of ZTA Zirconia Toughened Alumina Ceramic Block with high wear resistance

ZTA Zirconia Toughened Alumina Ceramic Block with high wear resistance is formed by isostatic pressing with super fine alumina particles mixed with certain zirconia ceramic powder after spray granulation, and sintered in our 60m long tunnel kiln at extremely high temperature.

The wear resistance and toughness of ZTA Zirconia Toughened Alumina Ceramic Block with high wear resistance arebetween alumina ceramics and zirconia ceramics, and has the characteristics of high hardness, excellent wear resistance andstrong toughness. It can meet the application environment of high strength impact and severe abrasion.Production Process of ZTA Zirconia Toughened Alumina Ceramic Block with high wear resistance


Advantages of ZTA Zirconia Toughened Alumina Ceramic Block with high wear resistance

1>. High hardness, second only to diamond, far more than wear-resistant steel and stainless steel;

2>. Good wear resistance, 60% lower than that of alumina products;

3>. Light weight, specific gravity 4.2g/cm3, greatly reducing the equipment load;

4>. It has firm adhesion and good heat resistance. It is pasted on the inner wall of the equipment with heat-resistantadhesive.It can run for a long time at 350 ºC without aging. The inorganic adhesive used for cemented products is wear-resistantat 750 ºC, and the adhesive has strong temperature resistance and adhesive force performance;

5>. Strong impact resistance, combined with zirconia toughness and wear resistance, the fracture toughness is 20%higher than that of alumina products, and the bending strength is 70%, which greatly reduces the impact of materials onequipment;

6>. It has high cost performance, greatly increases the service life of the equipment and reduces the comprehensiveproduction cost of the enterprise.

Application of ZTA Zirconia Toughened Alumina Ceramic Block with high wear resistance

ZTA Zirconia Toughened Alumina Ceramic Block with high wear resistance is installed on the impactareas of conveying systems, coal pulverizing systems, ash discharge and dust removal systems of thermal power, steel,smelting, machinery, coal, mining, chemical industry, cement, port and wharf, etc.


Specification of ZTA Zirconia Toughened Alumina Ceramic Block with high wear resistance
SpecificationLengthWidthThickness
Plain tile (without hole)50-22825-1006-80
Welding tile (with hole)50-22830-10010-80
Pipe tile50-22820-1008-80

Package of ZTA Zirconia Toughened Alumina Ceramic Block with high wear resistance !

Company profile

Zibo Zawa New Materials is one factory located in Zibo High-tech Industrial Development Zone, Shandong Province.It is a comprehensive enterprise integrating product design, R&D, production and sales. Its main products include ZTA zirconia toughed alumina ceramic liners, zirconia ceramic liners, 95 alumina wear resistant ceramic liners, 92 alumina ceramic liners,92 &95 alumina grinding balls, high purity alumina inert filler balls, alumina ceramic tubes, ceramic steel compound pipes,rubber backed ceramic plates , honeycomb ceramics and various special wear-resistant parts. Our annual output is around 20000tons.

The company's backbone employees have more than 15 years of industry production experience. While continuously absorbinghigh-level employees, they continuously carry out regular training for employees at all levels to ensure the implementation andcontrol of industry technology and post technology. Under the guidance of scientific development and bold innovation, the company creates tremendous value for direct users, intermediate users and agents, and truly achieves a win-win situationbetween producers and users.
Contact us for more about ZTA Zirconia Toughened Alumina Ceramic Plain Brick Wear Tile Liner as Industrial Linings!