High Hardness Alumina Ceramic Mosaic Square Pieces Sheets for Pulley Lagging Liner From Zibo China

Basic Info

Model NO.	Mosaic Ceramic Lining Pieces
Hexagonal Tile	S12.5xt3~20mm, S23.5xt6-25mm
Dimple Tiles	20X20X4-10+1(with 5 Dimples), 20X30X5~15+1(with 18
Ceramic Block	40X40X40mm, 45X45X50mm,32X32X22mm, 38X38X38mm,etc.
Ceramic Cylinder/Rod	6X6mm,15X15mm,20X20mm, 31X31mm,40X40mm, 45X50mm, 5
Al2O3	92%
Density	3.60 g/cm3
Hv 20	950
Rock Hardness Hra	82
Bending Strength MPa	220
Compression Strength MPa	1050
Fracture Toughness Kic Mpam 1/2	3.2
Wear Volume	0.25 Cm3
Transport Package	Box
Specification	customized size
Trademark	firstar
Origin	China
HS Code	6909120000
Production Capacity	400t/Month

Product Description

Product Description

High Hardness Alumina Ceramic Mosaic Square Pieces Sheets For Pulley Lagging Liner From Zibo China

1. Detailed descriptionThe alumina mosaic sheet is an excellent wear resistant ceramic material. Alumina ceramic hexagonal tile mat is widely used as wear liner for pulley lagging, rubber ceramic plate, rubber hose and kinds of irregular equipment. It can easily installation and fixing by expoxy resin glue.

The Ceramic tiles is a high-performance abrasion and impact resisting linings for high-impact, high-pressure applications in which ceramic tile may not have sufficient structural resistance, and high-performance rubber may not offer the required wear life. In extreme applications, the Cube liners can be installed in a matrix or abrasion resistant steel plate to provide structural support for the ceramic/rubber matrix and provide exceptional wear life where competing products cannot.Used in heavy industry for years as a cost-effective, wear-resistant solution, these lightweight materials offer high durability, strength, and excellent abrasion and corrosion resistance. Alumina wear resistant compositions include:l Alumina 92: most common wear product with great wear resistancel Alumina 95: increased wear performancel Alumina T95: premium alumina for best wear resistancel Zirconium toughened alumina(ZTA): increased strength and impact resistance2.Product features:> High hardness > Superior abrasion and impact resistance > Corrosion and chemical resistance > Light weight > Easy installation by epoxy resin or bolt > Improve your working environment-noise, vibration and safety3. Product Specification:- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.- Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)- Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.5. Ceramic wear lining tiles for a variety of applications:Processing equipment:l Pharmaceutical clean roomsl Food processing plantsl Grain handlingl Mineral processingl Cement manufacturingl Chemical processingl Large Cyclones:l Coal-fired power plantsl Steel Millsl Asphalt Plantsl Petrochemical plantsl Pulp and paper mills
Detailed Photos

Product Parameters

Category	HC90	HC92	HC95	HCT95	HC99	HC-ZTA	ZrO2
Al2O3	≥90%	≥92%	≥95%	≥ 95%	≥ 99%	≥75%	/
ZrO2	/	/	/	/	/	≥21%	≥95%
Density	>3.50g/ cm3	>3.60g/cm3	>3.65g/cm3	>3.70g/cm3	>3.83g/cm3	>4.10g/cm3	>5.90g/cm3
HV 20	≥900	≥950	≥1000	≥1100	≥1200	≥1350	≥1100
Rock Hardness HRA	≥80	≥82	≥85	≥88	≥90	≥90	≥88
Bending Strength MPa	≥180	≥220	≥250	≥300	≥330	≥400	≥800
Compression strength MPa	≥970	≥1050	≥1300	≥1600	≥1800	≥2000	/
Fracture Toughness KIc MPam 1/2	≥3.5	≥3.7	≥3.8	≥4.0	≥4.2	≥4.5	≥7.0
Wear Volume	≤0.28 cm3	≤0.25cm3	≤0.20cm3	≤0.15cm3	≤0.10 cm3	≤0.05cm3	≤0.02cm3

Company Profile

Qimingxing offer quality wear and Ant- impact ceramics, in combination with our experienced and competent staff, ensure the increased efficiency and service life of all equipments and materials to which they are applied. - Established Ultrafine Energy Efficiency Technology Research Institute - Increase lifespan of wearable parts - New improved technology and products - Minimal downtime to minimize delays in production - Variety of wear combating options available as a one stop solution - Strong focus on product innovation supported by Chinese Academy of Sciences. - Customized application techniques to suite any wear problem

Certifications

Packaging & Shipping

OTHER HOT SALE

More Abrasion ceramics products : abrasion ceramics , Alumina ceramics , wearresistant ceramics , alumina pipe liner , ceramic tube , alumina cylinder pipe , wear resistant alumina plate , abrasion ceramic tile , abrasive alumina sheet , friction plain tile , abrasion weldable tile , rubber backed ceramic liner , ceramic composite linings , alumina mosaic sheet , ceramic taper tile for pipe sleeve , ceramic ladder tile for pipe steel , engineering ceramics equipment , pre-fabricated pipe sleeve ,wear resistant bending pipe , abrasion materials

FAQFAQQ: What is your experience in your products?
A: We have 22 years experience in this industry line. We are professional manufacturer in this area.
Q: What is your MOQ?
A: The MOQ is different as per different products, for example, 1 Ton for ceramic ball.
Q: Can you accept small quantity sample order before production?
A: Yes, we can offer sample for your testing first
Q: Can you provide free sample?
A: Yes, within 1kg.
Q: What is your production time?
A: We have large stock for standard products. Normally within 7-10days after receipt the deposit.
Q: What are your payment terms?
A: T/T, L/C, Western Union